Neoprene / EPDM Adhesive Backed Foam Rolls
Adhesive Backed Foam Neoprene / EPDM Strip
Sound / Vibration insulation
Good for External / Outdoor applications
Useful for Padding
Good tear and abrasion resistance
Not suitable for the following - wet-suit repair, immersion in oils or for use around petrol or brake fluid.
Available in a variety of Various Widths, Thicknesses & Lengths This commercial specification Foam sheeting is suitable for a wide variety of engineering uses. (It is the customers responsibility to ensure suitability and safety of use)
Please see table below for properties and guidelines for use
| Requirement / Specification | Specification Limits | Typical Value |
| Size - skin / skin (mm) | 2000 x 1000 x 54 (±4) | |
| Compression @ 25% Deflection (kPa) ASTM D1056-00 | 35 - 65 | 43 |
| Compression Deflection @ 50% (kPa) ASTM D1056-00 | 80 - 160 | 112 |
| Density (kg/M³) ISO 845-95 | 120 ± 20 | 122 |
| Compression Set (50%22h20ºC ) ASTM D1056-00 | 25% Max | 19.10% |
| Water absorption, max. change in weight (%) ASTM D1056-0 | 10 | 0.8 |
| Heat Ageing, Change in Compression Deflection, 168 hrs @ 70ºC | ± 30% | PASS |
| Flammability FMVSS 302 | Burn Rate < 100mm | PASS |
| Flammability UL94 HBF | PASS | |
| Elongation at Break (%) ISO 1798-7 | N/A | >180 |
| Tensile Strength (KN/M²) ISO 1798-7 | N/A | >500 |
| Temperature Range (Low - High) | N/A | -40 TO + 85 ºC |
| High Intermittent | N/A | +100 ºC |
| Resistance to Air + UV | Excellent | |
| Resistance to Oil | Poor | |
| Resistance to Acids | Good | |
| Environmental Protection | CFC and HFC free / Can be recycled | |
| Specification | ASTM D1056-00 AFNOR 99-211 | 2A2 B2C 2CO8/3C08 B3 C2 |